Intel wishes we were inside - The Evil Dr Spinola
|
|
|
Advertisement
Subscribe to INQ newsletters
Advertisement
INQ Poll
You do not get better cooling with a 9700, is your computer located in Singapore where it is 90F with 90% HUMIDITY? I don't think so, that's where the test was takin place, so how about you learn to read better.
Take a look at this review at hardware canucks
http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/17444-cooler-master-v8-cpu-cooler-review-9.html
The OCZ Vendetta 2 is better than both up until the highest overclocks where the V10 wins by a couple of degrees. Also did I mention that the OCZ is over half the price of the V10 and around 25 bucks cheaper than the V8.
the v8, mixed with a yate loon d12sh (88cfm) on it is amazing, Idle on a 3.8ghz x4 955 is 33c, full load 45 :))
Nice review BUT: The V10 heat sink is not Installed correctly on the MOBO (sideways) - second: The cooling performance of 110F @ 4Ghz is very good in deed but: In reality The mobo usually is installed inside a computer case therefore the ambient temp inside the case is going to be higher = your 110F @ 4Ghz will increase to maybe 124F+ which is not acceptable. If your review was done with a complete build (which I think that it wasn’t) I do apologize for the confusion. And last; that is the Ugliest HS that I have ever seen in my natural life (lol)
Regards dude.
You look like a moron if you use a German word and do not know how to spell it.
Is the V10 related to K-9 ?
I will not claim that my Orochi is not also ridiculously large but it is at least nearly silent with a 1200 RPM fan on it, and it performs a bit better too.
Heheheh, I am always a bit worried that it's weight will crack the mobo in half though!
The V10 Peltier junction IIRC pumps heat only into the fins hanging off the side - why not put the junction between the CPU and the entire HS? Seems like a bit of candy to me.
Don't bother flaming me - I'm only on my first cuppa of the day.
...when they have an H16.
The V10 has to be the ugliest HS&F ever who the f*** created that. And the cooling performance just sucks for something that size. I get way better cooling using my Zalman CNPS9700. Not to mention that V10 looks like pure torture to install. You need your head examined for giving this crap 9/10 rating, definite fail.