Search for solutions, reports & analysis
Edited by Paul Hales
Published by Incisive Media Investments Ltd.
Terms and Conditions of use.
To advertise in Europe e-mail here
To advertise in Asia email here.
To advertise in North America email here.
Join the INQbot Mail List for a weekly guide to our news stories:
Comments
Colours
Red and green should never be seen!Expansion slot location
Is it just me, or are the expansion slots located too far from the edge of the board...as in, once you mount the thing in the case and put in graphx/sound/etc cards, the ports on the cards will still be set at least an inch away from the openings in the back of the case? And look at the center hold down point, the hole is actually located UNDER the heatpipe between the NB and SB!As you were...
I was waayyy off on the expansion slot comment...just looked funny to me.But I am still concerned over the placement of the ehatpipe over the screw hole....
Add a new comment: